REXNORD MB2115 Flange Block Bearings

ras max:0.6 mm; Lubrication hole on inner ring:Non/No; Precision class:P0; Brand:NTN; da min:49 mm; d:45 mm; F:55 mm; rs min:0.6 mm; B:20 mm; t:2 mm;

Flinger Material:Steel; Brand:Baldor-Dodge; Manufacturing Plant Location:Crossville, TN - DC; Bearing Family:Grip Tight Ball Bear; Seal Type:Single Lip; Retainer Type:Std Retainer; Housing Type:2 Bolt Pillow Block; Ring Size:Standard; Shaft Attachment (2):Grip Tight; Flinger Type:Rubberized;

Radial clearance class:CN; Max operating temperature, Tmax:110 °C; da max:17.5 mm; Static load, C0:2 kN; Mass:0.02 kg; Characteristic cage frequency, FTF:0.42 Hz; Nlim (grease):24,000 rpm; ra max:0.3 mm; Da max:26 mm; d:15 mm;

B:16.5 mm; d1:113 mm; Max operating temperature, Tmax:120 °C; Brand:NTN; Bearing ring (inner ring) WS mass:2.44 kg; rs min:2 mm; Min operating temperature, Tmin:-20 °C; d:190 mm;

Ball Grade:Class 10; Ball Bearing Housing Series:211 Series; Expansion Type:Non-Expansion; Housing Material:Cast Iron; Flinger Type:Standard; Bearing Locking Device:Setscrew; Bearing Thread Type:UNC; Ship Weight:9 LB; Ball Material:Steel; Brand:Baldor-Dodge;

Designation of housing:FC204N-; B:25 mm; s1:12.5 mm; C0:6.65 kN; J:78 mm; Weight:0.63 kg; N:12mm; G:M6x1; d:20 mm; A:25.5 mm;

Min operating temperature, Tmin:-40 °C; Category:Roller Bearings; Fatigue limit load, Cu:6.6 kN; Inventory:0.0; Characteristic rolling element frequency, BSF:6.19 Hz; Product Group:B04334; Nlim (oil):8,200 rpm; e:0.35; B:20.64 mm; Static load, C0:54 kN;

d1:51.1 mm; B1:51.1 mm; s1:36.3 mm; L:118 mm; Weight:1.7 kg; T max.:100 °C; e:21 mm; A2:53.3 mm; A:36 mm; C0:15.2 kN;

Product Group:B04144; B:34 mm; Characteristic outer ring frequency, BPF0:7.17 Hz; Minimum Buy Quantity:N/A; Radial clearance class:CN; Brand:NTN; db min:122 mm; Fatigue limit load, Cu:33.6 kN; E:163 mm; Characteristic inner ring frequency, BPFI:9.83 Hz;

C:12.8 kN; Weight:0.65 kg; A1:20 mm; d1:32.4 mm; B:34 mm; L1:21 mm; J:49 mm; T min.:-20 °C; H1:14 mm; H2:64 mm;

S:14.3 mm; Designation of housing:SP203-205/52-; G:R1/8"; Weight:1.61 kg; C0:7.88 kN; A:21 mm; SW:3.18 mm; Recommended tightening torque for set screw:3.7 Nm; s1:17 mm; T max.:100 °C;

C0:54.2 kN; m:14 mm; C1:10.3 mm; T min.:-20 °C; G:7/16-20UNF; T max.:100 °C; S:33.3 mm; B:82.6 mm; C:33 mm; D:140 mm;

C0:18.2 kN; d:38.1 mm; Recommended tightening torque for set screw:8 Nm; m:8 mm; T max.:100 °C; T min.:-40 °C; Weight:0.68 kg; B:49.2 mm; D:80 mm; G:5/16-24UNF;

C:25.7 kN; d:35 mm; C0:15.2 kN; J:130 mm; A2:48.4 mm; s1:30.2 mm; A1:14 mm; Recommended tightening torque for set screw:11.5 Nm; G:M6x1; T max.:100 °C;

Nlim:2,400 rpm; Characteristic rolling element frequency, BSF:6.26 Hz; Ce min:22 mm; B:88 mm; Da max:236 mm; e:0.33; Radial clearance class:CN; Mass:17.36 kg; Y2:3.06; Characteristic inner ring frequency, BPFI:10.37 Hz;