QM INDUSTRIES QMMC34J608ST Cartridge Unit Bearings

Harmonized Tariff Code:8482.10.50.68; Brand:NTN; ra max:0.3 mm; Noun:Bearing; D:24 mm; Characteristic rolling element frequency, BSF:5.49 Hz; Manufacturer Name:NTN; Maximum Capacity / Filling Slot:No; Outside Diameter:0.945 Inch | 24 Mill; Other Features:Deep Groove | Double;

Bearing Unit, Type:Pillow Type; Stroke:No; Unit, Type:Insert Bearing Unit; Accessory:No Cover; Rolling Element Material:Bearing Steel; Surface Treatment:No; Surface Treatment:No; Stroke:No; Grease Type:SH33M; Pillow Type, Category:Standard;

Bearing Part Number:6901; Height H(mm):25 ～ 40; Lateral Width L(mm):36; Bearing Retained:Yes (with retaining; Shape:Bottom Mount; Number of Bearings:Single; Holder Surface Treatment:Black Oxide Coating; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Type:Bearings with Housi

d:22.22 mm; A1:13 mm; Designation of housing:F205N-; Weight:0.84 kg; G:M6x1; C0:7.88 kN; A2:35.7 mm; Z:39.2 mm; L:95 mm; T min.:-20 °C;

Designation of housing:FL309-; A2:60 mm; C0:31.8 kN; d:41.28 mm; S:22 mm; T max.:100 °C; A:44 mm; H:230 mm; L:125 mm; e:25 mm;

Designation of housing:PE211N-; s1:27.8 mm; S:22.2 mm; H1:22.5 mm; A:60 mm; Z:77.7 mm; Designation of open end cover:SCOU211-35; L1:68 mm; N:18mm; J:176 mm;

G:M6x1; S:22.2 mm; e:25 mm; J1:86 mm; L1:104 mm; Weight:3.17 kg; s1:27.8 mm; A:43 mm; Designation of housing:FA211N-; N:16mm;

N:15mm; H:161 mm; G:M6x1; B1:51.1 mm; d:36.51 mm; C:25.7 kN; A2:51.3 mm; T min.:-20 °C; J:130 mm; A1:16 mm;

Dz:80 mm; B:42.9 mm; J:80 mm; Designation of closed end cover:SCC207; Recommended tightening torque for set screw:8 Nm; E:20 mm; L1:30 mm; Designation of housing:PA207N-; L:110 mm; H:47.6 mm;

B:31 mm; C:12.8 kN; Designation of housing:FLE204N-; d:20 mm; Z:41.6 mm; T max.:100 °C; H:112 mm; A:30.3 mm; T min.:-20 °C; L:61 mm;

Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Retained:No; Type:Bearings with Housin; Shape:Flange Type; Shape:Flange Type; Housing Material:[Aluminum Alloy] 201; Width T(mm):25 ～ 60; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6803;

Dz:70 mm; C:19.5 kN; N:16mm; Designation of bearing:UC206-20G2; L:80 mm; Weight:0.95 kg; Recommended tightening torque for set screw:3.7 Nm; A1:13 mm; A:31 mm; H:148 mm;

Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Lateral Width L(mm):24; Bearing Retained:No; Bearing Retained:No; Holder Surface Treatment:Clear Anodize; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Height H(mm):15 ～ 25; Thickness, Height Indication:T, h Selection;

H:33.3 mm; T min.:-40 °C; d:17.46 mm; B:31 mm; A:38 mm; T max.:100 °C; G:M6x1; Designation of bearing:UC203-11G2T04; Recommended tightening torque for set screw:3.7 Nm; E:16 mm;

I.D.(Ø):120; Outer Ring Shape:Flat; Retainer Type:No; O.D.(Ø):180; Type:Ball; Types:No; Seal, Shield Symbols:No; Outer Ring:With Outer Ring; Low Torque Specification:No; Width(mm):28;